Call Today

833-392-6200

}
Hours

Mon – Fri, 8am to 5pm

Swift Cleat Assembly Instructions

the boating industries first truly Customizable cleat

Step 1

Place your Swift Cleat on a hard surface with the logo facing you and right side up as shown in the image on the left.

Step 2

Rotate the Swift Cleat away from you.

Step 3

Drop the bolt through the right side cleat foot and through the loop in the smaller buckle strap. The hollow side of the buckle should be facing away from you towards the cleat. Tighten supplied brass nylock nut onto bolt with a 9/16 wrench. Tighten the nut until snug up against the cleat. 

Step 4

Drop bolt through the left side cleat foot and through the loop in the longer strap. The velcro strap should be facing out. Also note that the side of the strap with a single logo will be facing out and side with multiple logos facing in.  Tighten supplied brass nylock nut onto bolt  with a 9/16 wrench. Tighten nut until snug up against the cleat.

Final Result

This is what the final result of your Swift Cleat should look like.

If you have any questions please don’t hesitate to reach out to us.

Questions about your Swift Cleat?

Contact Us

FREE QUOTE